Follow us on Twitter Like us on Facebook Check out our pics on Instagram Division Camera - Home Add us to your Google+ Circle View our vids on YouTube Read our Blog Follow us on Twitter Like us on Facebook Check out our pics on Instagram Add us to your Google+ Circle View our vids on YouTube Read our Blog
HOME : Cameras : Monitors : Wireless Video :
IDX CW-7 Cam-Wave HD Wireless Transmission System - AB
Rental Rate: Create Quote to View
531694ca47c3fe1d2800025e_icon-add.png 53181f6df3fb9b4b63000252_icon-total.png
Includes Cam-Wave TX and RX, SDI Cable. Does not fit 7" Marshall.
The new and improved CW-7, uncompressed wireless HD-SDI/SDSDI transmission system delivers superior image quality up to 300ft, while maintaining a zero frame delay. Perfect for outdoor or indoor productions and events, the CW-7 wirelessly transmits HD video and audio from a professional camera to a monitor. Event, television, and film productions can save time on prep by eliminating long cable runs from the camera to video village or display. Dynamic Frequency Selection allows CW-7 to operate on less crowded channels within the license exempt 5GHz spectrum.

Transmitter and Receiver Specifications

Frequency: 5.190GHz 5.795GHz
Tuning Range / Frequency Selection: Four selectable channels or one auto select/DFS
Select Transmit Power: 80mW maximum (TX only)
Transmitter/Receiver Antenna: Internal 18dBi gain
Transmit Method: MIMO
Modulation: Orthogonal Frequency Diversity Multiplexing (OFDM)
Latency: Less than 1ms
Video Input: HD-SDI (SMPTE 292M) and SD-SDI (SMPTE 259M-C)
Video Formats: HD-1080/60i, 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 1080/24p, 1080/23.98p, 1080/30PsF, 1080/29.97PsF, 1080/25PsF, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, SD-4:2:2 YcbCr 10bit, 525i/59.94, 625i/50
Audio Input (TX)/Audio Output (RX): Two channels SDI embedded

Product Data

Power Requirement: 11-18V DC via battery plate or 4-pin XLR connector
Power Consumption: 12W approx.
Dimension: 6.22(W)x2.83(D)x7.40(H) inches
Weight: 1.76 lbs approx.

Optional mounting installation for A/B 3-stud version is available for any or all sides of the transmitter and receiver modules. Factory-installed one-centimeter spacers for monitors or other source attachment to the CW-5HD TX or RX is also an option. Contact IDX Sales to confirm specific model compatibility before ordering.

Important FCC rules and regulations: Wireless operation on the 5GHz U-NII spectrums do not require users to obtain a license; however, the FCC has strict regulations and requires wireless devices to support DFS when operating on frequency ranges 5.250GHz-5.350GHz and 5.470GHz-5.725GHz. Weather and US government agency radar systems operate on these frequencies and must not be interfered with. The DFS function will detect and vacate channels that are in use by weather and US government agency radar systems.

FCC prohibits transmission power modifications and hardware modifications by the user.
FCC prohibits the ability to change frequencies and region codes by the user.
FCC prohibits importation and use of non US approved transmitters in the US.
FCC strongly prohibits manufacturers and/or distributors to offer non US approved transmitters; this includes modifications to the original hardware and/or software.
FCC only authorizes the use of wireless equipment specifically made for and shipped in the US market.
Violators of these rules and regulations may face legal action.